Please use this identifier to cite or link to this item: http://localhost:8082/xmlui/handle/123456789/48
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRajeshmon, V G-
dc.contributor.authorSudha Kartha, C-
dc.contributor.authorVijayakumar, K P-
dc.date.accessioned2015-09-01T05:53:02Z-
dc.date.available2015-09-01T05:53:02Z-
dc.date.issued2014-
dc.identifier.citationAIP Conference Proceedings 1591, 1686 (2014); doi: 10.1063/1.4873077en_US
dc.identifier.urihttp://hdl.handle.net/123456789/48-
dc.description.abstractEffect of spray rate on structural, optical and electrical properties of spray pyrolysed Cu2ZnSnS4 (CZTS) thin films was investigated. We deposited films by varying spray rate from 2 ml/min to 10 ml/min in steps of 2 ml/min. For very low and high spray rates presence of secondary phases could be observed while for the films prepared at a spray rate of 6 ml/min were devoid of secondary phases. As spray rate increases band gap decreased. Samples prepared at 6 ml/min had optimum band gap of 1.5 eV. All the samples were observed to be p-type. Resistivity values increased steadily up to 6 ml/min and then slightly decreased. From the present work, CZTS films prepared at a spray rate of 6 ml/min is found to be ideal for absorber layer in solar cell.en_US
dc.language.isoenen_US
dc.publisherAIP Publishingen_US
dc.subjectSpray coating techniquesen_US
dc.subjectCZTSen_US
dc.subjectOptical propertiesen_US
dc.subjectX-ray diffractionen_US
dc.titleModification of optoelectronic properties of sprayed CZTS thin films through spray rate variationen_US
dc.typeArticleen_US
Appears in Collections:Conference Publications

Files in This Item:
File Description SizeFormat 
Rajeshmon.pdf646.97 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.